Clip the swivel clasps of the body strap onto each of the metal rings of the two Sling-Ski® holding members.

Place ski bases together and lay skis onto the ground. Lay poles parallel over one pair of ski bindings.

Place the Sling-Ski® holding member closest to the shoulder pad under skis and poles, positioned in FRONT of the ski bindings at about 1/3 the length from skis tips. Loop up to the top of the skis and feed the ladder portion of the Sling-Ski® into the mouth of the buckle. Pull through until slight resistance is encountered.

Place the second Sling-Ski® holding member around skis and poles, position it directly BEHIND [or ON the binding for larger skis] the ski binding. Loop up to the top and feed the ladder portion of the Sling-Ski® into the mouth of the buckle. Pull through until slight resistance is encountered.

Rotate the holding members so that the metal rings are positioned at the side edges of the skis. This will ensure that the ski bindings will rest against your back to provide maximum comfort during use.

When skis are bound by the Sling-Ski® ratchet [by repeatedly lifting] the silver tab of the buckle to TIGHTEN skis and poles securely. Once tight, feed the excess ladder portion through the metal ring of the holding member for extra security and to prevent flapping.

Wear the Sling-Ski® diagonally across the chest for security and comfort, or hung over one shoulder.

To disengage the Sling-Ski® carefully lift the entire secured unit from your body and place it onto the ground. Release the ladder from the metal ring on the holding members. Place thumb over the silver buckle head and squeeze the black plastic tab back towards it, this will release the ladder portion of the Sling-Ski® holding member to release skis and poles.

Return to view our products